Cisco Systems 8.6 manual System Enterprise Phone, Configuration, Unified CM, the data

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Network Configuration Menu

Table 4-2 Network Configuration Menu Options (continued)

Option	Description		To Change
SW Port Configuration	Speed and duplex of the network port. Valid values:		1.	Unlock network configuration
	•	Auto Negotiate		options.
	•	10 Half—10-BaseT/half duplex	2. Scroll to the SW Port
				Configuration option and then
	•	10 Full—10-BaseT/full duplex
				press the Edit softkey.
	•	100 Half—100-BaseT/half duplex	3. Scroll to the setting that you
	•	100 Full—100-BaseT/full duplex		want and then press the Select
				softkey.
	•	1000 Full—1000-BaseT/full duplex
			4. Press the Save softkey.
	If the phone is connected to a switch, configure the port
	on the switch to the same speed/duplex as the phone, or
	configure both to auto-negotiate.
	If you change the setting of this option, you must change
	the PC Port Configuration option to the same setting.
PC Port Configuration	Speed and duplex of the access port. Valid values:		1.	Unlock network configuration
	•	Auto Negotiate		options.
	•	10 Half—10-BaseT/half duplex	2. Scroll to the PC Port
				Configuration option and then
	•	10 Full—10-BaseT/full duplex
				press the Edit softkey.
	•	100 Half—100-BaseT/half duplex	3. Scroll to the setting that you
	•	100 Full—100-BaseT/full duplex		want and then press the Select
				softkey.
	•	1000 Full—1000-BaseT/full duplex
			4. Press the Save softkey.
	If the phone is connected to a switch, configure the port
			To configure the setting on multiple
	on the switch to the same speed/duplex as the phone, or
			phones simultaneously, enable the
	configure both to auto-negotiate.
			Remote Port Configuration in the
	If you change the setting of this option, you must change
			Enterprise Phone Configuration
	the SW Port Configuration option to the same setting.		(System > Enterprise Phone
			Configuration).
			Note If the ports are configured for
				Remote Port Configuration
				in Unified CM, the data
				cannot be changed on the
				phone.

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

4-8 OL-23091-01