Chapter 7 Monitoring the Cisco Unified IP Phones Remotely

Network Configuration

Table 7-2

Network Configuration Area Items (continued)

 

 

 

 

 

 

 

Item

 

 

Description

 

 

 

 

 

 

SW Port Configuration

 

Speed and duplex of the switch port, where:

 

 

 

 

A—Auto Negotiate

 

 

 

 

10H—10-BaseT/half duplex

 

 

 

 

10F—10-BaseT/full duplex

 

 

 

 

100H—100-BaseT/half duplex

 

 

 

 

100F—100-BaseT/full duplex

 

 

 

 

No Link—No connection to the switch port

 

 

 

 

 

 

PC Port Configuration

 

Speed and duplex of the switch port, where:

 

 

 

 

A—Auto Negotiate

 

 

 

 

10H—10-BaseT/half duplex

 

 

 

 

10F—10-BaseT/full duplex

 

 

 

 

100H—100-BaseT/half duplex

 

 

 

 

100F—100-BaseT/full duplex

 

 

 

 

No Link—No connection to the PC port

 

 

 

 

To configure the setting on multiple phones simultaneously, configure the Remote Port

 

 

 

 

Configuration in the Enterprise Phone Configuration (System > Enterprise Phone

 

 

 

 

Configuration).

 

 

 

 

Note If the ports are configured for Remote Port Configuration in Unified CM, the data

 

 

 

 

 

cannot be changed on the phone.

 

 

 

 

 

 

 

TFTP Server 2

 

 

Backup TFTP server that the phone uses if the primary TFTP server is unavailable.

 

 

 

 

 

 

 

User Locale

 

 

User locale associated with the phone user. Identifies a set of detailed information to

 

 

 

 

support users, including language, font, date and time formatting, and alphanumeric

 

 

 

 

keyboard text information.

 

 

 

 

 

 

 

Network Locale

 

 

Network locale associated with the phone user. Identifies a set of detailed information to

 

 

 

 

support the phone in a specific location, including definitions of the tones and cadences

 

 

 

 

used by the phone.

 

 

 

 

 

 

Headset Enabled

 

Indicates whether the Headset button is enabled on the phone.

 

 

 

 

 

 

User Locale Version

 

Version of the user locale loaded on the phone.

 

 

 

 

 

 

Network Locale Version

 

Version of the network locale loaded on the phone.

 

 

 

 

 

 

PC Port Disabled

 

Indicates whether the PC port on the phone is enabled or disabled.

 

 

 

 

 

 

Speaker Enabled

 

Indicates whether the speakerphone is enabled on the phone.

 

 

 

 

 

 

 

GARP Enabled

 

 

Indicates whether the phone learns MAC addresses from Gratuitous ARP (GARP)

 

 

 

 

responses.

 

 

 

 

 

 

Video Capability Enabled

 

Indicates whether the phone can participate in video calls when connected to an

 

 

 

 

appropriately equipped PC.

 

 

 

 

 

 

Voice VLAN Enabled

 

Indicates whether the phone allows a device attached to the PC port to access the Voice

 

 

 

 

VLAN.

 

 

 

 

 

 

Auto Line Select

 

Indicates whether the phone shifts the call focus to incoming calls on all lines.

 

 

 

 

 

 

 

 

 

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-23091-01

 

 

 

 

 

7-7

 

 

 

 

 

 

 

 

Page 169
Image 169
Cisco Systems 8.6 manual Cannot be changed on the phone, Vlan