Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Network Configuration Menu

Table 4-2 Network Configuration Menu Options (continued)

Option

 

 

Description

To Change

 

 

 

 

 

 

PC VLAN

 

 

Allows the phone to interoperate with third-party switches

1.

Unlock network configuration

 

 

 

that do not support a voice VLAN. The Admin VLAN ID

 

options.

 

 

 

option must be set before you can change this option.

2. Make sure the Admin VLAN ID

 

 

 

 

 

 

 

 

 

 

 

option is set.

 

 

 

 

 

3. Scroll to the PC VLAN option,

 

 

 

 

 

 

press the Edit softkey, and then

 

 

 

 

 

 

enter a new PC VLAN setting.

 

 

 

 

 

4. Press the Validate softkey and

 

 

 

 

 

 

then press the Save softkey.

 

 

 

 

 

VPN

 

 

Shows the virtual private network (VPN) Client state:

Display only—Cannot configure.

 

 

 

Connected

 

 

 

 

 

Not Connected

 

 

 

 

 

(Supported only for the Cisco Unified IP Phone 7942G,

 

 

 

 

 

and 7962G.)

 

 

 

 

 

 

 

 

 

Table 4-3describes the IPv4 configuration menu options.

 

 

Table 4-3

IPv4 Configuration Menu Options

 

 

 

 

 

 

Option

 

Description

To Change

 

 

 

 

 

DHCP

 

Indicates whether the phone has DHCP enabled or

1.

Unlock network configuration

 

 

disabled.

 

options.

 

 

When DHCP is enabled, the DHCP server assigns the

2. Scroll to the DHCP option and

 

 

phone anIPv4 address. When DHCP is disabled, you

 

press the No softkey to disable

 

 

manually assign an IPv4 address to the phone.

 

DHCP, or press the Yes softkey

 

 

 

 

 

 

to enable DHCP.

 

 

 

 

 

3. Press the Save softkey.

 

 

 

 

 

IP Address

 

Internet Protocol version 4 (IPv4) address of the phone.

1.

Unlock network configuration

 

 

If you assign an IPv4 address with this option, you must

 

options.

 

 

 

 

 

 

also assign a subnet mask and default router. See Subnet

2.

Set the DHCP option to No.

 

 

Mask and Default Router 1 options in this table.

3. Scroll to the IP Address option,

 

 

 

 

 

 

 

 

 

 

 

press the Edit softkey, and then

 

 

 

 

 

 

enter a new IP Address.

 

 

 

 

 

4. Press the Validate softkey and

 

 

 

 

 

 

then press the Save softkey.

 

 

 

 

 

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

OL-23091-01

4-9

 

 

 

Page 81
Image 81
Cisco Systems 8.6 manual PC Vlan, Vpn