Chapter 3 Setting Up the Cisco Unified IP Phones

Adjusting the Placement of the Cisco Unified IP Phone

Use the Phone Button Template Configuration to configure the buttons.

Cisco Unified Communications Manager includes several default phone button templates. When adding phones, you can assign one of these templates to the phones or create a new template.

To configure the 48 additional buttons, follow these steps:

Procedure

Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone Button Template.

Step 2 Click the Add New button.

Step 3 From the drop-down list, choose a template and click Copy.

Step 4 Rename the new template.

Step 5 Update the table to 54 Directory Numbers for Cisco Unified IP Phone 7962G.

See Cisco Unified Communications Manager Administration Guide and Cisco Unified Communications Manager System Guide for more information on creating and modifying templates.

Note You can also attach two Cisco Unified IP Phone Expansion Modules 7915s or two Cisco Unified IP Phone Expansion Modules 7916s, to provide 48 additional lines or speed-dial and feature buttons.

Related Topic

Configuring Softkey Templates, page 5-27

Adjusting the Placement of the Cisco Unified IP Phone

The Cisco Unified IP Phone includes an adjustable footstand. When placing the phone on a desktop surface, you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60 degrees. You can also mount these phones to the wall by using the footstand or by using the optional locking wall mount kit.

Adjusting Cisco Unified IP Phone Placement on the Desktop

You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to the height that provides optimum viewing of the phone screen. See Figure 3-4for more information.

Procedure

Step 1 Push in the footstand adjustment button.

Step 2 Adjust the footstand to desired height.

 

 

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

 

 

 

 

 

 

OL-23091-01

 

 

3-11

 

 

 

 

 

Page 67
Image 67
Cisco Systems 8.6 manual Adjusting the Placement of the Cisco Unified IP Phone, Configuring Softkey Templates