Cisco Systems 8.6 manual That the remote party receives. The remote party, See also Recording Tone

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

							Device Configuration Menu
Table 4-15		Media Configuration Menu Options (continued)
	Option		Description				To Change
	Recording Tone		Indicates whether a recording tone (often				From Cisco Unified Communications Manager
			referred to as a beep tone) is enabled or disabled				Administration, choose Device > Phone > Phone
			for the phone. If the recording tone option is				Configuration.
			enabled, the phone plays the beep tone in both
			directions of every call, regardless of whether
			the call actually gets recorded. The beep tone
			first sounds when a call is answered.
			You may want to notify your users if you enable
			this option.
			Default: Disabled
			Related Parameters:
				• Recording Tone Local Volume
				• Recording Tone Remote Volume
				•	Recording Tone Duration
			Note			Other related parameters—Beep tone
						frequency in hz, the length of the beep
						tone (called duration), and how often
						the beep tone plays (called
						interval)—are defined on a
						per-Network Locale basis in the xml file
						that defines tones. This xml file is
						usually named tones.xml or
						g3-tones.xml.
	Recording Tone Local		Indicates the loudness setting for the beep tone				From Cisco Unified Communications Manager
	Volume		that is received by the party whose phone has the				Administration, choose Device > Phone > Phone
			Recording Tone option enabled.				Configuration.
			This setting applies for each listening device
			(handset, speakerphone, headset).
			Range: 0 percent (no tone) to 100 percent (same
			level as current volume setting on the phone).
			Default: 100
			See also: Recording Tone
	Recording Tone		Indicates the loudness setting for the beep tone				From Cisco Unified Communications Manager
	Remote Volume		that the remote party receives. The remote party				Administration, choose Device > Phone > Phone
			is the party who is on a call with the party whose				Configuration.
			phone has the Recording Tone option enabled.
			Range: 0 percent to 100 percent. (0 percent is
			–66 dBM and 100 percent is –3 dBM.)
			Default: 84 percent (–10dBM)
			See also: Recording Tone
				Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
	OL-23091-01							4-29