Cisco Systems 8.6 manual UI Configuration Menu, Device Phone Phone Configuration, Parameters

Chapter 4 Configuring Settings on the Cisco Unified IP Phones

Device Configuration Menu

UI Configuration Menu

The UI Configuration menu displays the status of various user interface features on the phone. Table 4-14describes the fields in this menu.

Table 4-14	UI Configuration Menu Options
Option		Description	To Change
Auto Line Select		Indicates whether the phone shifts the call focus	From Cisco Unified Communications Manager
		to incoming calls on all lines.	Administration, choose
		When this option is disabled, the phone only	Device > Phone > Phone Configuration.
		shifts the call focus to incoming calls on the line
		that is in use. When this option is enabled, the
		phone shifts the call focus to the line with the
		most recent incoming call.
		Default: Disabled
BLF for Call Lists		Indicates whether the Busy Lamp Field (BLF) is	From Cisco Unified Communications Manager
		enabled for call lists.	Administration, choose System > Enterprise
			Parameters.
Reverting Focus		Indicates whether the phone shifts the call focus	From Cisco Unified Communications Manager
Priority		on the phone screen to an incoming call or a	Administration, choose System > Device Pool.
		reverting hold call. Settings include:	See also: Hold Reversion.
		Lower—Focus priority given to incoming calls.
		Higher—Focus priority given to reverting calls.
		Even—Focus priority given to the first call.
Auto Call Select		Indicates whether the phone automatically shifts	From Cisco Unified Communications Manager
		the call focus to an incoming call on the same line	Administration, choose Device > Phone >
		when the user is already on a call.	Phone Configuration.
		When this option is enabled, the phone shifts the
		call focus to the most recent incoming call.
		When this option is disabled, all automatic focus
		changes, including Auto Line Select, are disabled
		regardless of the setting.
		Default: Enabled
“more” Softkey Timer		Indicates the number of seconds that additional	From Cisco Unified Communications Manager
		softkeys are displayed after the user presses	Administration, choose Device > Phone > Phone
		more. If this timer expires before the user presses	Configuration.
		another softkey, the display reverts to the initial
		softkeys.
		Range: 5 to 30; 0 represents an infinite timer.
		Default: 5

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-26	OL-23091-01