Cisco Systems 8.6 manual Parts Used in Wall Mounting the Cisco Unified IP Phone

Chapter 3 Setting Up the Cisco Unified IP Phones

Adjusting the Placement of the Cisco Unified IP Phone

Caution Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.

Procedure

Step 1 Push in the footstand adjustment button.

Step 2 Adjust the footstand, so it is flat against the back of the phone.

Step 3 Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand. The keyholes fit standard phone jack mounts.

Step 4 Hang the phone on the wall.

Figure 3-4 Parts Used in Wall Mounting the Cisco Unified IP Phone

AUX

137542

1

2

3

Footstand adjustment button—Raises and lowers adjustment plate

Wall mounting screw holes

Adjustment plate—Raises and lowers phone vertically

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01		3-13