Cisco Systems 8.6 See Cisco Communications Manager, Communications Manager Administration, Guide

Chapter 1 An Overview of the Cisco Unified IP Phones

Overview of Configuring and Installing Cisco Unified IP Phones

Table 1-7	Checklist for Configuring the Cisco Unified IP Phone 7962G and 7942G in Cisco Unified Communications
	Manager (continued)
Task	Purpose	For More Information
5.	Customize softkey templates.	See Cisco Unified Communications Manager
	Adds, deletes, or changes order of softkey features	Administration Guide, Softkey Template Configuration.
	that display on the user’s phone to meet feature usage	See Configuring Softkey Templates, page 5-27.
	needs.
6.	Configure speed-dial buttons and assign speed-dial	See Cisco Unified Communications Manager
	numbers (optional).	Administration Guide, Cisco Unified IP Phone
	Adds speed-dial buttons and numbers.	Configuration chapter, Configuring Speed-Dial Buttons
		section.
	Note Users can change speed-dial settings on their
	phones by using Cisco Unified CM User
	Options.
7.	Configure Cisco Unified IP Phone services and assign	See these sections:
	services (optional).	• See Cisco Communications Manager
	Provides IP Phone services.	Administration Guide, Cisco Unified IP Phone
	Note Users can add or change services on their	Services Configuration.
	phones by using the Cisco Unified CM User	• See Setting Up Services, page 5-28.
	Options.
	Note You must specify a service URL with an IPv4
	address.
8.	Assign services to phone buttons (optional).	See Cisco Unified Communications Manager
	Provides single button access to an IP Phone service	Administration Guide, Cisco Unified IP Phone
		Configuration.
	or URL.
9.	Add user information by configuring required fields.	See Cisco Unified Communications Manager
	Required fields are indicated by an asterisk (*); for	Administration Guide, End User Configuration.
	example, User ID and last name.	See Adding Users to Cisco Unified Communications
	Note Assign a password (for User Options web	Manager, page 5-28.
	pages) and PIN (for Extension Mobility and	Note If your company uses a Lightweight Directory
	Personal Directory).
		Access Protocol (LDAP) directory to store
	Adds user information to the global directory for	information on users, you can install and
		configure Cisco Unified Communications to use
	Cisco Unified Communications Manager.
		your existing LDAP directory, see Configuring
		Corporate Directories, page 5-24.
		Note If you want to add both the phone and user to the
		Cisco Unified Communications Manager
		database at the same time, see the User/Phone
		Add Configuration chapter in the Cisco Unified
		Communications Manager Administration
		Guide.

	Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
1-24	OL-23091-01