10Use the right cam journal to raise the pinch+wheels, and lift the right side of the drive roller up.
11Lift the roller out of the plotter.
Reassembling: See following procedure
After reassembling make sure that you check the carriage$to$media distance ' page 7$11
Reinstalling the Drive Roller
In the following procedure take care not to injure your fingers if you let the drive roller snap into place
U T
In the following procedure
DTake care not to damage the media separator. Don't let it slip under the drive roller.
DTake care that the edge of the media separator does not damage the rubber surface of the drive roller.
1Flex the media separator upwards and position the roller behind it and on top of the pinch wheels.
2Make sure that the gear on the left side of the roller is positioned immediately to the left of the side+plate.
6+42 RemovalandReplacement | C4699+90000 |