Reinstalling the Entry laten
The order in which you replace the screws on the entry platen is important.
1osition the entry platen between the two side%plates feeding the media sensor cable under the right side%plate.
2ake sure that the media%sensor cable is not obstructing the movement of the media%sensor flags.
3Slide the top of the entry platen in and correctly position it on the inside of each side%plate.
On each sideplate, the upper two pins should touch the entry platen above it.
4Refasten the indicated entry%platen clips.
5Inserting a screwdriver under the side%plate on the right of the entry platen lever the entry platen over to the left so that it is flush against the left side%plate.
C4699%90000 | RemovalandReplacement 6%49 |