Detecting the Lines and Media Edges
Line Sensor
The line sensor on the cartridge carriage is used to:
DDetect the left and right media edges.
DDetect and measure lines drawn on media when performing accuracy calibration.
DScan the setup and alignment sheets.
350C330 D Find the platen roller reference mark.
Providing Ink
Print Cartridges
The DesignJet 250C uses the same four print cartridges as does the DesignJet 650C. The DesignJet 350C uses the same three color print cartridges as does the DesignJet 750C and 755CM plotters and the same black cartridge as the DesignJet 650C. The DesignJet 230 and 330 plotters use only the black cartridge which is used in the DesignJet 650C.
Distance between Carriage and Media
The distance between the carriage and the writing surface can determine image sharpness. As the distance increases, the drop shape and directionality degrade and are more difficult to predict. You can change the distance using the adjusting screw on the carriage. (Details ' chapter 7.)
Carriage (Side View)
Adjusting Screw
Back Slider
| ||
| Engaging Tab | |
Beam | Integrated | |
Cross±section | ||
Line Sensor | ||
|
C4699490000 | FunctionalOverview 547 |