Removing the Drive Roller

1Remove the drive&roller gear ' page 6&25.

2Remove the media motor ' page 6&26.

3Remove the pinch&arm&lever linkage ' page 6&27.

4Remove the engaging&lever support ' page 6&31.

5Remove the large black plastic gear from the left side&plate.

Torx-20

6Remove the overdrive roller ' page 6&32.

7Remove the three screws that attach the media&motor mount to the right sideplate.

Torx-20

8Remove the media&motor mount.

9Snap the overdrive clips to the right￿ and remove them from under the media separator.

D/A1￿size plotters have two clips. E/A0￿size plotters have three clips.

C4699&90000

Removal￿and￿Replacement 6&41￿