Removing the Left End%Cover

1Remove the top cover ' page 6%7.

 2 Remove the roll%feed assembly ' page 6%8.

3Release the three clips at the bottom of the end%cover: first the side clip￿ then the front and back clips.

These may be stiff.

A

B

C

4Pull the end%cover up￿ and remove it from the plotter.

￿￿￿￿￿￿m￿￿￿n￿￿ It's not easy to reinstall the end covers on the plotter. With some practice, you should learn the knack. As a guide, before you replace an end cover, take a look at the various clips on its inside, and identify where they fit on the plotter.

Make sure that the primer plunger is installed properly when reinstalling the end cover.

C4699%90000

Removal￿and￿Replacement 6%9￿