Reinstalling the Overdrive Enclosure

The order in which you replace the screws on the overdrive enclosure is important.

￿￿ U T I O N

Take care not to damage the media(sensor flags. The overdrive enclosure should not touch them.

1Replace the two indicated screws. (Short dog(point screws.)

Torx-15

1

Torx-15

2

2Insert the two indicated screws, but do not tighten them. (Long dog(point screws.)

Torx-15

3

Torx-15

4

3Replace the indicated screw and tighten it, thus aligning the overdrive enclosure with the left side(plate.

Torx-15

5

4Tighten the screws you inserted in step 2.

C4699(90000

Removal￿and￿Replacement 6(47￿