HP Designjet 250C Removing the Pinch)Arm)Lever Linkage, Removing the Primer

Removing the Pinch)Arm)Lever Linkage

1Remove the right end)cover ' page 6)10.

2Ease the front plastic part of the linkage to the right￿ out from the hole in the right side)plate.

3Remove the linkage from the cam journal on the right side)plate.

Removing the Primer

1Remove the left end)cover ' page 6)9.

2Disconnect the four short tubes from the ink separator.

3Remove the screw that attaches the primer to the left side)plate.

Torx-20

4Slide the primer to the left￿ and remove it from the plotter.

C4699)90000 Removal￿and￿Replacement 6)27￿