![](/images/backgrounds/287009/hp-designjet-250c-users-manual-54870587x1.png)
Removing the Bail*Lift
Mechanism
1Remove the bail ' page 6*5.
2Remove the primer ' page 6*27.
3Remove the service station ' page 6*28.
4While pushing the top of the bail*gear assembly towards the front of the plotter
do the following:
aOn the engaging lever move the cable ball slightly towards the back of the plotter.
bAllow the engaging lever to move towards the left of the plotter so that the cable comes free of the lever.
5Release the cable from the engaging*lever support.
6Release the cable from the bail*gear assembly.
C4699*90000 | RemovalandReplacement 6*29 |