Replacing the Media(Sensor Assembly

1Insert the t(shaped flag in the indicated position.

2Let the t(shaped flag rotate to its correct position.

1

2

3Insert the bell(shaped flag in the indicated position.

4Let the bell(shaped flag rotate to its correct position.

3

4

5Insert the long arm of the media(sensor assembly into the slot at the back of the entry platen as shown.

6Ensure that the two flags have not been mispositioned.

7Press the media(sensor assembly up onto the post on the underside of the entry platen￿ until it clicks into place.

8Refasten the media(sensor cable in its clip￿ making sure that it does not obstruct motion of the media(sensor flags.

6(16 Removal￿and￿Replacement

C4699(90000