Removing the Overdrive Roller
1Remove the primer ' page 6)27.
2Remove the service station ' page 6)28.
3Remove the clutch retaining ring that secures the overdrive clutch to the overdrive roller.
Note the position and orientation of the overdrive clutch. When correctly installed, the overdrive roller can be manually rotated forward only.
4While flexing the media separator upwards ...
... slide the overdrive roller horizontally to the right until the overdrive clutch can drop free of the roller.
5Move the overdrive roller to the right until it has completely cleared the left sideplate but not entered the hole in the right sideplate.
6Release the overdrive roller from the small black clips underneath the media separator and remove the overdrive roller from the plotter.
Reassembling: Position the Cclips and bushings on the overdrive roller from left to right as follows:
Cclip - clutch - bushing - sideplate - bushing - Cclip.
6)32 RemovalandReplacement | C4699)90000 |