7Remove the en￿a￿in￿ lever.

8Remove the sprin￿ from the bail!￿ear assembly.

9Loosen the screw from the top of the bail!￿ear assembly.

Torx-8

10Remove the screw from the plastic bail ￿ear.

You may need to hold the bail cam steady inside the side￿plate at the same time. You can access the cam through the hole underneath the side￿plate.

Torx-15

11Pull the bail ￿ear assembly out from the plotter.

The cam falls to the floor of the plotter.

6!3￿ Removal￿and￿Replacement

C4699!9￿￿￿￿