4Slihtly rotate the motor on its hine until the indicated part of the black plastic is parallel with the side of the chassis beam.
Beam
Black Plastic
5Pull the motor out to the riht of the plotter.
The motor may be stiff.
essemling There are two springs on the motor assembly:
One fits onto the protruding plastic part on top of the motor. Position this part inside the chassis beam.
The other is a flat metal spring attached underneath the motor. Position it underneth the chassis beam.
Also, make sure the belt is correctly positioned on the grooves of the shaft.
6" RemovalandReplacement | C4699"9 |