￿ntering Service Mode 2

1 Switch the plotter off.

2 While holding the Print Quality key down, switch the

plotter on.Print

Quality

3Once the the LEDs begin to light up one

by one (as shown below), release the Print Quality key.





or





or

The plotter performs the electrical power!on tests and initializes the mechanics as in normal user mode. (Details ' chapter 8.)

4Place the Service Mode 2 front,panel overlay over the keys on the plotter.

The overlay is supplied with this manual. The front!panel keys in service mode are described on page 7!5.

Stopping a Test

Shift

Some of the service tests are continuously repeated until you stop them. To stop a test, press the Shift key.

7,4 Calibrations￿and￿Adjustments

C4699,90000