Removing the Cartridge
Carriage
1Remove the encoder strip ' page 6&17.
2Remove the right bracket ' 6&21.
U T
In the following step take care not to break the black plastic tab on top of the motor.
3Press the carriage motor towards the left and remove the belt from the motor shaft.
If you need greater maneuverability of the motor, press the black plastic tab on top very slightly downwards.
B
A
Reassembling: Make sure the belt is correctly positioned on the grooves of the shaft.
4Rotate the motor on its hinge out towards the back of the plotter.
5Release the belt from the pulley on the left of the plotter.
Reassembling: Make sure the belt is correctly positioned on the grooves of the pulley.
In the following steps take care neither to cut yourself on the encoder strip nor to damage the strip
C4699&90000 | RemovalandReplacement 6&37 |