Reinstalling the Pinch+Arm Lift Mechanism
1Reinsert the pinch+arm assemblies into the chassis. Make sure that the bushings are correctly inserted in the holes.
2Slide the bar cam to the right. You must position it between the left and right sideplates, or the lift mechanism will not work.
U T I O N
In the following step do not overtighten the cam+journal screw. Doing so could break the journal cause the bar cam to enter the side+plate hole and thus restrict the action of the pinch+arm lever.
3Before repositioning the right cam journal tighten its nut just to the point where the nut is inside the journal. Reinstall the journal and slightly tighten the screw.
C4699+90000 | RemovalandReplacement 6+4 |