Removing the Electronics Module
The electronics module is a fieldreplaceable part. You do not need to open it. If it is faulty, exchange it for a new one.
1Remove the right end)cover ' page 6)10.
2Disconnect the front)panel assembly from the main PCA ' page 6)12.
3Unscrew the cover plate at the back of the plotter and remove it.
or | Flat |
4Remove the indicated two screws from the back cover.
2
1
5Remove the indicated screw from the floor of the electronics module.
6At the back of the plotter ensure that the two small wire clamps of the parallel port are positioned flush against the electronics module
7Push the electronics module towards the front of the plotter.
C4699)90000 | RemovalandReplacement 6)13 |