Loading Roll Media on the DesignJet 330 and 350C

The following diagram shows the Roll media0loading sequence. The vertical arrows represent movement of the media. The thick horizontal bars represent movement of the carriage to sense the media edges.

1

2

3

 

13

4

10

 

 

9

 

5

11

12

6

 

7

8

 

During roll media loading, the plotter:

1Grips and advances the media.

2Moves the media forwards and backwards to check whether it is still present and correctly gripped.

3Advances the media and rechecks media presence. (The loading process fails if the media sensor detects no media.)

4Actuates the bail so that the media can advance under it.

5Again moves the media forwards and backwards to check for its presence. (The loading process fails if the media sensor detects no media.)

6Advances the media several inches and rechecks media presence. (The loading process fails if the media sensor detects no media.)

7The plotter stops and allows you to realign the media.

8Again moves the media forwards and backwards to check for its presence. (The loading process fails if the media sensor detects no media.)

9Moves the media backwards several inches.

10Moves the carriage to sense the right and left edges and to check dimensions.

11Advances the media several inches.

504 Functional￿Overview

C4699090000