
11Carefully pull the encoder strip to the right through and out of the carriage assembly.
12Lay the encoder strip on a flat surface.
Reinstalling the Encoder Strip
1Move the cartridge carriage to the left over the service station.
2Ensure that the encoder strip is oriented with the transparent area up and with two holes on the left side and one hole on the right side.
W R N I N G
In the following steps take care neither to cut yourself on the encoder strip nor to damage the strip
3Feed the encoder strip through the cartridge carriage from right to left.
4Temporarily rest the loose strip safely on the drive roller.
5Slip the left end of the strip over the plastic pin on the left bracket and press it right to the base of the pin.
C4699'90000 | RemovalandReplacement 6'19 |