Removing the Back Cover

1Remove the left and right end&covers ' pages 6&9 and 6&10.

2Remove the screws that attach the back cover to the plotter.

D/A1#size plotters have 2 screws. E/A0#size plotters have 3 screws.

Torx-20

￿￿￿￿￿￿m￿￿￿n￿￿ Before replacing the screws, ensure that the electronics module is flush against the inside back of the plotter.

￿￿ U T I O N

In the following steps￿ take care not to damage the parallel&port clips.

3Pull the bottom of the cover slightly back and out from the plotter.

4Lift the cover up￿ and remove it from the plotter.

C4699&90000

Removal￿and￿Replacement 6&33￿