HP CD/DVD Tattoo labels

Place one sheet of CD/DVD tattoo paper in the input tray with the print side down; slide the CD/DVD tattoo paper forward until it stops.

NOTE: When you use CD/DVD tattoo labels, leave the tray extender closed.

Related topics

Choose papers for printing and copying” on page 18

Set the paper type for printing” on page 31

Print on transparencies” on page 43

Reverse an image for iron-on transfers” on page 43

Print a group of addresses on labels or envelopes” on page 44

Create custom cd/dvd labels” on page 37

Avoid paper jams

To help avoid paper jams, follow these guidelines.

Remove printed papers from the output tray frequently.

Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.

Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.

Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.

Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure the paper-width guide does not bend the paper in the input tray.

Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide.

Do not force paper too far forward in the input tray.

Use paper types that are recommended for the HP All-in-One.

Related topics

Clear paper jams” on page 82

Load originals and load paper

Avoid paper jams

27

Page 30
Image 30
HP C4200 manual Avoid paper jams, HP CD/DVD Tattoo labels