To Attach
1.Turn the speed control to OFF.
2.Unplug mixer or disconnect power.
3.Loosen the attachment knob by turning it counterclockwise, and remove the attachment hub cover or flip up hinged hub cover.
4.Insert the attachment shaft housing into the attachment hub, making certain the attachment power shaft fits into the square attachment hub socket. It may be necessary to rotate the attachment back and forth. When the attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim.
5.Tighten the attachment knob by turning it clockwise until the attachment is completely secured to mixer.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
To Remove
1.Turn the speed control to OFF.
2.Unplug mixer or disconnect power.
3.Loosen the attachment knob by turning it counterclockwise. Rotate the attachment slightly back and forth while pulling it out.
4.Replace the attachment hub cover. Tighten attachment knob by turning it clockwise.
ENGLISH
6.Plug into a grounded 3 prong outlet.
19