Kyocera FAX SYSTEM manual Printing Out an F-Code Confidential Box List

Section 4 Other Features of this Fax

3.Touch the key that corresponds to the desired F-Code Confidential Box if it is highlighted. If the key is not highlighted, there are no documents in that box.

*If you registered “0000” as the F-Code password, go to the next step. If you registered any other password, proceed directly to step 5.

4.Touch the “Yes” key. The documents that are in that F-Code Confidential Box will be printed out.

5.Use the keypad to enter the F-Code password (4 digits) that corresponds to that F-Code Confidential Box.

(Inch)

(Metric)

6. Touch the “Confirm” key.

The documents that are in that F-Code Confidential Box will be printed out.

(5) Printing Out an F-Code Confidential Box List

Print out this list in order to check the information in each F-Code Confidential Box as well as data regarding the existence of documents in each respective box.

*If there are no F-Code Confidential Boxes registered in this fax, an F-Code Confidential Box List will not be printed out.

*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.

1.Touch the “Print Report” key. The Report Selection screen will appear.

(Inch)

(Metric)

2.Touch the “Subad conf box list” key.

(Inch)

(Metric)

3.To print out an F-Code Confidential Box List, touch the “Yes” key. An F-Code Confidential Box List will be printed out.

(6) Entering Documents into an F-Code Confidential Box

Perform the following procedure when you want to enter documents into your F-Code Confidential Box for transmission under the F-Code Based Bulletin Board function. Using this procedure, you can add new documents to those currently in your F-Code Confidential Box, and you can also delete all of the documents currently in that box and replace them with new documents.

*If you want to delete the data for documents stored in an F-Code Confidential Box, simply print out those documents.

(Refer to “(4) Printing Out Documents from an F-Code Confidential Box” on page 4-13.)

*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.

1. Set the documents you want to transmit.

4-14