Kyocera FAX SYSTEM manual Table of Operations Available, Unavailable under Dual Access

Section 1 Fax Operation (Basic Use)

> Checking the status of a fax communication in progress		● Table of Operations Available/
(Inch)			Unavailable under Dual Access
				Additional operation
			Initial operation
		1		During set-up for sending documents in the Direct Feed
				Transmission mode*
(Metric)		2		During set-up for sending documents in the Memory Trans-
				mission mode
		3		During scanning of documents in the Memory Transmission
				mode
		4		During transmission in the Direct Feed Transmission mode
		5		During direct reception of documents (w/o using the memory)
Touch the “Status” [“Act status”] key in the bottom right of the touch
panel. The document number and information related to the other		6		During transmission in the Memory Transmission mode
party will be displayed. (NOTE: It is possible to cancel that ongoing
communication by touching the “Stop” key.)		7		During Memory Reception
* Touch the “Close” key to return to the previous screen.
		8		During direct print out of received documents (w/ the
				transmitting party still connected)
		9		During print out of received documents from memory (after
> Checking the status of a print out in progress				being disconnected from the transmitting party)
		0		During print out of a Transmission or Reception Report, or an
	(Inch)			Activity Report, AFTER a communication
			! During manual print out of a Report or List
			@ During procedures for fax-related settings or registration
			# During use of both the Scanning and Printing sections when
(Metric)				the machine is used as a copier
			$ During use of the Printing section when the machine is used
				as a copier
			% During use of the Printing section when the machine is used
				as a printer
			^ During use of the Printing section when the machine is used
				as a scanner
Touch the “Status” [“Act status”] key in the bottom right of the touch
panel.
* Touch the “Close” key to return to the previous screen.
<When the Dual Access function is not available>
There are cases in which the Dual Access function is not available.
For example, during a fax communication to one party, you will not be
able to receive a fax from another party, nor can you perform setting
or registration procedures during any fax transmission or reception.
In such cases, perform the desired operation after the current
communication is completed.
Refer to “● Table of Operations Available/Unavailable under Dual
Access”, for more detailed information regarding which operations
can and cannot be performed simultaneously.
* Communications that use the timer will not be accomplished, even
upon reaching the designated time for the communication to begin,
until the current operation has been completed.

1-10