Section 2 Fax Operation (Various Functions)
>Deleting a chain dial key 5. Touch the “Yes” key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue deleting other chain dial keys, repeat steps 3 through 5. If you are finished deleting chain dial keys, press the Reset key.
>Modifying registered information
6.If you want to modify the abbreviated number (the displayed number of the
If you want to modify any other basic information, touch the key that corresponds to that information. (To modify information, refer to the corresponding step under “(1) Registering” on page
7.Enter the abbreviated number of an unregistered
*Once a
(Inch)
(Metric)
8.Touch the “Close” key.
9.Once you are finished modifying all of the items that you want, touch the “OK” key.
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other chain dial keys, repeat steps 3 through 9. If you are finished deleting chain dial keys, press the Reset key.
(3) Using a Chain Dial Key
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1.If the operation involves the transmission of documents, set the documents you want to transmit.
2.Press the desired
(Inch)
(Metric)
3.Enter the other party’s fax number.
*You can enter the fax number using the keypad, abbreviated numbers,
*Once the other party’s fax number is entered, only the registered chain dial name will be displayed, followed by the other party’s fax number or name.
*If you want to enter the fax number once again from the beginning during input with the keypad, simply press the Stop/ Clear key.
4.Press the Start key. The communication operation will begin automatically.
