Section 6 Various Settings and Registration
Setting the Number of Rings (Auto Fax Reception)
The number of times the fax will “ring” before an incoming call is answered in the Auto Fax Reception mode, the Auto FAX/TEL Switching mode [this setting is not available in metric models] or the TAD Reception mode can be set here to any number between 1 and 15.
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1.Press the Default key. The Default Setting screen will appear.
(Inch)
(Metric)
2.Touch the “Fax default” key.
3.Touch the “▼” key until “# of Rings” is highlighted.
4.Touch the “Change #” key.
(Inch)
(Metric)
5.Use the “+” or
6.Touch the “Close” key. If you are finished making settings, press the Reset key.
Making Volume Settings
The volume of the alarm, the monitor and the speaker can be adjusted here, or you can make the alarm inaudible.
<Alarm Volume>
Sets the volume of the alarm that sounds in the event of an error or when you press an incorrect key on the operation panel.
<Monitor Volume>
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line when the
<Speaker Volume>
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line when the
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1.Press the Default key. The Default Setting screen will appear.
(Inch)
(Metric)
2.Touch the “Fax default” key.
3.Touch the “▼” cursor key until “Set Volume” [“Set the sound volume”] is highlighted.
