Section 1 Fax Operation (Basic Use)
(3) Dialing
You can dial a fax number by simply pressing the
*To select the conditions related to transmitting documents, such as the resolution and contrast, refer to pages
*Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation.
(Refer to "(2) Initial Mode" on page
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
If the operation involves the transmission of documents, set
1 the documents you want to transmit.
If you want to change the transmission conditions, such as
2 the resolution and contrast, touch the “TX setting” key. If you do NOT want to change the current conditions, go directly to step 5.
Touch the key that corresponds to the desired item and
3 change the information as desired. (To change each transmission condition, refer to pages
Once you are finished changing transmission conditions,
4 touch the “One touch destinat.” key.
5 | Touch the |
is registered. |
(Inch)
(Metric)
Press the Start key.
6 The transmission operation will begin automatically.
*Any time you set documents on the platen, after each document is scanned you will need to select whether or not you want to scan more pages into memory. (Refer to page
(4)Printing Out a One-Touch Key List
Print out this list in order to check the fax numbers registered under
*If there are no
*Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode” on page
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
Touch the “Print Report” key. The Report Select screen will
1 appear.
(Inch)
(Metric)
2 Touch the
(Inch)
(Metric)
To print out that list, touch the “Yes” key. A
3 List will be printed out.
