Kyocera FAX SYSTEM manual Names of Parts, Main Body Parts and their Functions, Document Processor

Section 1 Fax Operation (Basic Use)

Names of Parts

(1) Main Body Parts and their Functions

The following contains information on the names and functions of the parts that are required when this machine is used as a facsimile.

Refer to the Operation Guide for your copier for information on other parts of this machine.

Main Body + Duplex Document Processor attached

1Operation panel...Use the operation panel to perform the procedures required for fax communication.

2Fax storage section...Received documents are ejected and stored face-down in the fax storage section. Up to 250 sheets can be stored in this section at one time.

3Drawers...This fax machine comes standard with two drawers installed. Each drawer can hold up to 500 sheets of plain paper (60 g/m2 - 105 g/m2). Refer to the Operation Guide for your copier

for more detailed information regarding the use of the drawers.

4Multi-Bypass...Paper can be set in the Multi-Bypass as well. In order to use the Multi-Bypass, it is necessary to select “ON” under “Turning Manual Paper Feed ON/OFF” on page 6-8. Refer to the Operation Guide for your copier for more detailed information

regarding the use of the Multi-Bypass.

5Telephone jack (T)...Use this jack to connect a separately purchased telephone to the fax.

6Line jack (L)...Use this jack to connect the fax to a telephone line

using the modular cord.

7Main switch...Turn this switch ON ( ) in order to perform fax and copy operations. The touch panel will light and operation will be possible.

Document Processor

●Document Processor

There are 2 optional document feeders available for use with this machine: the Document Processor for feeding one-sided documents, and the Duplex Document Processor for using both sides of 2-sided documents.

*Both the Document Processor and Duplex Document Processor can be used with the 25 copies per minute machine. However, only the Duplex Document Processor can be used with both the 35 copies per

minute machine and the 40 copies per minute machine.

8Document table...Set the documents you want to transmit on this table. Up to 70 sheets of up to 11" x 8 1/2" [A4] size paper, or up to 50 sheets of 8 1/2" x 14" or 11" x 17" [A3 or Folio] size paper, can be set at one time.

9Document insert guides...Adjust these guides to match the width of

the documents.

0Document Processor reversing cover...Open this cover if a

document jams.

!Document eject cover...Documents are ejected onto this cover after being scanned.

@Eject guide...Open this guide when transmitting documents of a

large size such as 8 1/2" x 14" or 11" x 17" [A3 or Folio].

#Document Processor open/close lever...Operate this lever when

opening and closing the Document Processor.

$Document set indicator...This indicator indicates the status of the documents set in the Document Processor. Documents are set properly when the indicator is lit green.

1-1