NEC 750176-1 manual Press, If calls should be

EliteMail VMS/EliteMail Limited Issue 1

An active code On the pop-up window has * in its checkbox.

After you open the Access Code Options window, it stays open as you ￿scroll through the Personal Directory to view subscriber pages.

Transfer?

When call transfer is turned on for a subscriber, you can set several custom features that control how the voice mail system transfers calls. The subscriber can turn call transfer on/off from any touchtone telephone. When call transfer is on, the custom settings configured on the Personal Directory page take effect. Even if call transfer is turned off for a particular subscriber, you may want to set up custom call transfer features. That way, when the subscriber turns call transfer on, the custom features are available.

1.Highlight this field.

2.To turn call transfer on, enter Y, and press ￿￿￿￿￿￿￿￿.

3.	After the ￿, enter X, and press ￿￿	if calls should be
	transferred to the subscriber extension. Or enter a different
	telephone extension number, and press￿￿￿￿￿￿￿￿.
4.	To turn call transfer off, enter N, press	, and skip the rest

￿of this section. Call transfer type

The transfer type field, below the Transfer? field, is not labeled. The type can be Release, Await-Ans, or Wait-ring. To change the setting, ￿position the cursor over the existing setting, and enter:

Worksheet Choice	Enter
Release	R, and press
Await Answer	A, and press ￿￿￿￿￿￿￿￿￿
Wait for Ringback	W, and press
______ rings

In the rings field, enter the number of times the extension should ring before the caller is transferred to the subscriber voice mailbox, and

￿press ￿￿￿￿￿￿￿￿.

This does not apply if you select Release call transfer.

Job Specifications Manual 3 - 37