Issue 1

EliteMail VMS/EliteMail Limited

 

 

 

 

Should the system call the subscriber extension?

Check Yes if you want messages delivered to each subscriber work telephone, as described above. If No, skip the rest of this worksheet.

Wait ___ minutes after a new message arrives

Check to select, and enter the time you want the system to wait before delivering new messages. This field applies to Batch message delivery only. Enter the days and times you want the voice mail system to call you to deliver your messages. Select the number of times the voice mail system rings a subscriber extension on each delivery attempt.

Each, Batch, or Urgent Delivery

Select whether you want Each, Batch or Urgent delivery. Also, enter the ￿time (in minutes) between delivery attempts.

Each

The voice mail system calls the subscriber each time a new message comes in, regardless of when it last tried to call the subscriber. This method speeds up the delivery of new messages, but also increases system dial out time. This means that the dial-out ports may be tied up more frequently. If the dial-out ports are constantly busy, the voice mail system may have to hold dial-out requests in a queue until a

￿dial-out port is free. This could cause delivery delays. Batch

Any message that comes in since the last attempted delivery is added to the batch and delivered at the next specified time interval. A 30-minute delivery time is suitable for most installations. Using batch message delivery lessens the time the voice mail system ties

￿up voice ports dialing out to deliver messages. Urgent

Urgent message delivery works like Each message delivery, except the voice mail system only calls you when an urgent message comes in. The system won’t call when new messages that are not urgent are waiting.

2 - 20

Fill in the Worksheets

Page 33
Image 33
NEC 750176-1 manual Should the system call the subscriber extension?, Wait minutes after a new message arrives