EliteMail VMS/EliteMail Limited

Issue 1

 

 

 

 

Most systems are set to send a voice message to everyone with public message access (no P access code). A public message is a special message available only to authorized subscribers. If you choose to send error messages to subscribers with public message access, ensure that you set at least one subscriber for public message access when you complete Table 2-12 Sample Worksheet 12 – Special Subscriber Settings. You may also want to remove the C access code for subscribers with public message access, so the system can call them or light a lamp when new public messages are waiting.

You may also specify one or more specific subscribers who should receive these messages. This may or may not be the same subscribers who receive public messages. Write each subscriber name and Personal ID on the worksheet.

For details about public messages or error messages, refer to the EliteMail

VMS/EliteMail Limited Technician Guide.

Table 2-6 Sample Worksheet 6 – System Security

Worksheet

6

System Security

Use this worksheet to specify several system-wide features that protect your system from unauthorized access and from certain system errors.

53.How many times should a caller be allowed to misdial?

4 times￿___________ times

Should a caller be routed to another System ID for help after misdialing repeatedly? No (system hangs up) ￿Yes, route to System ID ____________

55.When should the system ask subscribers to delete unnecessary messages? When less than 15 minutes of message storage space is left

When less than ________ minutes of message storage space is left

58.Who should receive a voice message if a system error occurs? Everyone who receives public messages

￿These subscribers:Name:Jonathan WinterPersonal ID: 92219

Name:__________________________ Personal ID: _________

Name:__________________________ Personal ID: _________

Application Screen Page 6

Job Specifications Manual

2 - 23

Page 36
Image 36
NEC 750176-1 manual System Security