Issue 1

￿

EliteMail VMS/EliteMail Limited

 

 

 

Max ID attempts:

Use this field to set the number of times a caller can misdial.

1.To use a value other than the default of 4, highlight this field.

2.Enter the new value, and press ￿￿￿￿￿￿￿￿￿.

3.If a caller should be routed to another System ID for help after misdialing, highlight the Bad ID Goto￿field. Enter the new value, and press ￿￿￿￿￿￿￿￿.

Disk full warning at ___ mins left

Use this field to set the number of minutes of available message storage space remaining before the system asks subscribers to delete unnecessary messages.

1.To change this setting, highlight this field.

￿2. Enter the new value, and press ￿￿￿￿￿￿￿￿. Error notices to:

Use this field to set who should receive a voice message if certain system errors occur. The system is set by default to the System ID for the Operator Box (System ID 0), that sends the messages to everyone with public message access. If the System ID for the Operator Box is different on your system, replace 0 with the correct ID.

1.To send the messages to a subscriber, replace the Operator Box System ID with a subscriber Personal ID.

2.To send the messages to more than one subscriber, separate the subscriber Personal IDs with commas (e.g.,

8123,8456,8678).

You can also send the message to everyone with public message access and to one or more subscribers (e.g.,

￿0,8123,8456,8789).

If you use the Operator Box System ID to send error notices to everyone with public message access, remove the P access code for at least one subscriber. For details, refer to Worksheet 12 .

3 - 18

Fill in the Screens

Page 98
Image 98
NEC 750176-1 manual 8123,8456,8678, 8123,8456,8789