Pepper Computer RS485 Jumpers J1 and J2, Jumper J3 Eeprom Protection, Jumper J4 and J5 DAC Output

SMART I/O User’s Manual Chapter 5 Analog Modules

5.1.6 Configuration

The SM-DAD1 has 5 solder jumpers which may be configured as follows:

Jumpers J1 and J2

These jumpers are reserved for PEP use only.

Jumper J3 - EEPROM Protection

	Jumper S e t t i n g s				Description
		J3	set	EEPROM is not hardware write protected
			open	EEPROM is hardware write protected
Jumper J4 and J5 - DAC Output
		Jumper S e t t i n g s			Description
		J4	open		VOUT0 unipolar 0V .. +10V
			set		VOUT0 bipolar -10V .. +10V
		J5	open		VOUT1 unipolar 0V .. +10V
			set		VOUT1 bipolar -10V .. +10V

Note

If altering the mode (unipolar/bipolar) of the DAC output, be sure that software is aware of the change.

Page 5 - 12 ©1996 PEP Modular Computers GmbH March 12, 1996