
Chapter 4 Digital Modules | SMART I/O User’s Manual | |||
|
|
|
|
|
|
|
|
|
|
4.2SM-DOUT1
4.2.1Introduction
The
4.2.2 Specifications
Isolation | 2.5 kV optoisolated from the system |
|
| 8 Digital Channels |
|
| 2 Independent Groups |
|
|
| |
| 500mA Continuous Current (per |
|
| channel) |
|
| Inductive Load Protection (clamp |
|
Output | diode) |
|
Power ON/OFF Protection | : 90V/10∝s (35V) | |
| Overvoltage Protection | |
| Output Voltage | : 24V DC |
| Switch ON Delay (resistive) | : 3∝s (at 24V) |
| Switch OFF Delay (resistive) | : 130∝s (at 24V) |
| Max. Frequency | : 1 kHz square |
|
| wave |
| Output ON | : Intern. Logical '0' |
| Output OFF | : Intern. Logical '1' |
| Outputs after Reset | : OFF |
Front Panel | Yellow LEDs ON when the output is ON |
|
Power Consumption | 5mW (min.), 270mW (max.) |
|
Temperature Range | Standard (0°C to +70°C), Extended | |
Module Weight | 70g |
|
ID Byte | $10, read by the SPI Interface |
|
|
|
|
|
March 12, 1996 | ©1996 PEP Modular Computers GmbH | Page 4 - 19 | |
|
|
4 |