![](/images/new-backgrounds/1180387/180387233x1.webp)
Chapter 4 Digital Modules | SMART I/O User’s Manual | |||
|
|
|
|
|
|
|
|
|
|
4.2.9 ISaGRAF Programming
4.2.9.1 The ISaGRAF Board Parameters
Information on board parameters may be found in the PEP online help and
ISaGRAF online help or user’s manual.
Figure 4.2.9.1.1 a Typical Screen Section for the SM-DOUT1 Module
4
Logical Address
The 8 outputs of this module may be clearly seen together with the logical address at which this particular board is residing. Remember, this logical address is the same as the physical slot position! In the example shown here, the board being addressed is in slot 1 i.e. the first of the
Module Specific Information
reset_on_close : This variable allows ISaGRAF to return the status of all the output channels to zero (0V) when the appli- cation is closed.
|
|
|
|
March 12, 1996 | ©1996 PEP Modular Computers GmbH | Page 4 - 29 | |
|
|