SMADC1SetLed Syntax | Pepper Computer RS485, RS232 guide

5.4.8.5 SMADC1SetLed

error_code SMADC1SetLed(u_int8 PortNr, u_int8 LedNr);

This function switches on one of the two LEDs fitted to the SM-ADC1.

u_int8 PortNr u_int8 LedNr

error_code

SM-Port number to be accessed Number of the LED to switch on (1-2)

SUCCESS	if module was not initialised
E_SEEK	if module was not initialised
E-BMODE	if the module is unknown

or standard OS-9 error code (refer to the OS-9 Technical Manual Error Codes Section).

RetVal = SMADC1SetLed(0, 2);