Introduction | SMART I/O User’s Manual | |||
|
|
|
|
|
|
|
|
|
|
1.5.2 Installation of the ISaGRAF for Windows Workbench
The following steps should be followed to ensure successful installation of the ISaGRAF software. Initially the disk labelled Workbench Disk 1/4 will be required.
•Start Windows
•Insert diskette Workbench Disk 1/4 into the floppy drive (usually A:)
•Select File from the Windows Program Manager and select Run ...
•Type A:\INSTALL in the command field and select OK
The ISaGRAF installation will start automatically. Figure 1.5.2.1 illustrates a typical opening screen.
Figure 1.5.2.1 Typical Opening Screen
1
|
|
|
|
March 12, 1996 | ©1996 PEP Modular Computers GmbH | Page 1 - 19 | |
|
| ||
