Pepper Computer RS485, RS232 user manual ISaGRAF-Installation, Before Installing

SMART I/O User’s Manual Introduction

1.5ISaGRAF-Installation

1.5.1Before Installing

ISaGRAF is a Windows™ 3.xx based software development tool requiring a minimum of 10 MB of hard disk space and 4 MB of available memory.

Before installing ISaGRAF, make a backup copy of each DOS disk in the package and write-protect them to prevent accidental overwriting of files.

Note : The backup disks must have the same volume labels as the original ISaGRAF disks. Use the Windows Copy Disk... command on the Disk menu in the File Manager to create backup disks with the original volume labels and disk contents.

If it is intended to install ISaGRAF in a directory other than the default (C:\ISAWIN) then remember to provide the full path of the new directory when prompted during installation.

Altogether, 10 DOS disks and 2 OS-9 disks are supplied for ISaGRAF installation; four for the Workbench, two composite and four for the ISaGRAF Target and are labelled:

“Workbench Disk 1/4”

“Workbench Disk 2/4”

“Workbench Disk 3/4”

“Workbench Disk 4/4” “Lib/Appli/Help Disk 1/2” “Lib/Appli/Help Disk 2/2” “Samples for OS-9 1/1” “Target Disk 1/2” for DOS “Target Disk 2/2” for DOS

“Profibus FMS for ISaGRAF, Documentation, Disk 1/1” “Target Disk 1/2” for OS-9

“Target Disk 2/2” for OS-9

Page 1 - 18 ©1996 PEP Modular Computers GmbH March 12, 1996