| D e s c r i p t i o n | Order Nr. |
| Micro PLC & real-time computer, 1 MByte EPROM, 512 kByte DRAM, | |
| 64kByte SRAM, OS-9 v3.0, ISaGRAF v3.0x, PROFIBUS v3.12, Layer | 13843 |
| 2 & 7, RTC, full modem RS232 (8-pin RJ45 connector), 190 mAh |
| |
| battery, housing and terminal block for the 24V DC power supply | |
| As product 13843 but with additional 1 MByte Flash memory (TSOP) on | 13844 |
| solder side |
| |
| Expansion module for the SMART-BASE supporting 2 SMART-Modules | 4228 |
| Delivered without terminal blocks, SMART-Modules or blank panels |
| |
| SMART-Module with 8 optoisolated 24V DC digital inputs | 4229 |
| SMART-Module with 8 optoisolated 24V DC/500mA digital outputs | 4231 |
| SMART-Module with 4 channel A/D (±10V), 2 channel D/A (±10V, 0..10V) | 9868 |
| SMART-Module with 4 optoisolated 2, 3 or 4-wire PT100 inputs | 12405 |
| SMART-Module with 4 optoisolated thermocouple inputs | 12426 |
| SMART-Module with 6 optoisolated normally open relay outputs | 12238 |
| SMART-Module with RS232 (Rx & Tx) interface | 12461 |
| SMART-Module with 1 SSI channel providing a 24V DC digital input and a | 12825 |
| 24V DC, 500mA digital output | |
| SMART-Module with 6 12-bit, ±10V optoisolated analog inputs | 13380 |
| SMART-Module with 6 12-bit, 0..20mA optoisolated analog inputs | 13868 |
| SMART-Module with 2 12-bit, ±10V optoisolated analog outputs | 13379 |
| SMART-Module with 2 12-bit, 0..20mA optoisolated analog outputs with | 14018 |
| current sensing for broken sensor detection |
| |
| SMART-Module with 6 12-bit, ±10V optoisolated analog outputs | 14019 |
