SMART I/O User’s Manual | Chapter 6 Communications Modules | |||
|
|
|
|
|
|
|
|
|
|
6.1.6 Configuration
Jumper J1 - EEPROM Protection
Jumper Settings | Description | |
J1 | set | EEPROM is not hardware write protected |
| open | EEPROM is hardware write protected |
6.1.7 Pinouts
Screw Terminal Pinouts
The following shows the pinout/signal relationship for the
Pin 1 | Pin 13 |
Pin 2Pin 14
|
| Pin Nr. Signal | Description | Pin Nr. Signal | Description |
| ||||
| 1 | TxD | Transmit Signal | 2 | N/C | No Connection |
| |||
3 | RxD | Receive Signal | 4 | N/C | No Connection | |||||
5 | DTR | Data Terminal Ready | 6 | N/C | No Connection | |||||
7 | CTS | Clear to Send | 8 | N/C | No Connection | |||||
9 | N/C | No Connection | 10 | N/C | No Connection | |||||
11 | N/C | No Connection | 12 | N/C | No Connection | |||||
13 | GND | Ground | 14 | GND | Ground | |||||
| Page | 6 - 8 |
|
| ©1996 PEP Modular Computers GmbH | March 12, 1996 | ||||
|
|
| ||||||||
|
|
|
|
|
|
|
| |||
