Pepper Computer RS232, RS485 user manual Smart I/O Module Installation

Introduction SMART I/O User’s Manual

Screw terminal connectors are available in packs of 5.

1.4.2 SMART I/O Module Installation

The SMART I/O Modules are fitted into the relevant sockets (ST1 - ST6; 3 slots) on the SMART-BASE or in sockets on the SMART-EXT unit. It is important that the Modules are inserted the correct way. The Figure below illustrates this procedure.

Figure 1.4.2.1 : SMART I/O Module Installation

1

SMART-Module SMART-Module

Socket

WARNING!

Once fitted on the board, the Module sockets and components should be on the right hand side of the Module.

March 12, 1996 ©1996 PEP Modular Computers GmbH Page 1 - 15