Pepper Computer RS485, RS232 8 ‘C’ Programming 5.1.8.1 SM-DAD1 Library, Hardware Requirements

SMART I/O User’s Manual Chapter 5 Analog Modules

5.1.8‘C’ Programming 5.1.8.1 SM-DAD1 Library

The SM-DAD1 library of functions smartio.l provide a convenient way of accessing the SM-DAD1 module.

•All functions are written in ANSI C;

•Prototypes are to be found in the file dad1lib.h.

Hardware Requirements

•SMART I/O Base Module or Base Module and Extension unit;

•SM-DAD1 Module.

Software Requirements

The compiler from one of the following:

•Ultra C Version 1.1.2 or higher;

•FasTrak 2.0.2 or higher.

The leftmost SM-Module has number 0 assigned to it a far as programming is concerned although physically this is slot 1!

Before a library function can be used, the function SMDAD1Init must first be called. This allocates the requested resources. Furthermore, this function needs to be called for each SM-DAD1 Module called within the task. Upon completion of the application, the function SMDAD1DeInit needs to be called for each SM-DAD1 Module that has been initialized.

In order to illustrate the use of the SM-DAD1 library, an application example called demodad1.c can be found in the SMART I/O application directory (normally found in /<device>/APPLIC/SMART/CMDS).

Page 5 - 16 ©1996 PEP Modular Computers GmbH March 12, 1996