Chapter 5 Analog Modules | SMART I/O User’s Manual | |||
|
|
|
|
|
|
|
|
|
|
5.2.6 Configuration
Jumper J1 - EEPROM Protection
Jumper S e t t i n g s | Description | |
J1 | set | EEPROM is not hardware write protected |
| open | EEPROM is hardware write protected |
5.2.7 Pinouts
Screw Terminal Pinouts
The following shows the pinout/signal relationship for the
Pin 1 | Pin 13 |
|
| Pin 2 |
| Pin 14 |
|
|
|
|
| ||
Pin Nr. Signal | Description | Pin Nr. Signal | Description | ||
1 | Cur 0 | 400∝A source for sensor | 2 | Cur 1 | 400∝A source for sensor |
3 | In 0+ | Sense line 0 positive | 4 | In 1+ | Sense line 1 positive |
5 | In 0 - | Sense line 0 negative | 6 | In 1 - | Sense line 1 negative |
7 | AGND | GND between 2 sensors | 8 | AGND | GND between 2 sensors |
9 | In 2+ | Sense line 2 positive | 10 | In 3+ | Sense line 3 positive |
11 | In 2 - | Sense line 2 negative | 12 | In 3 - | Sense line 3 negative |
13 | Cur 2 | 400∝A source for sensor | 14 | Cur 3 | 400∝A source for sensor |
5
|
|
|
|
March 12, 1996 | ©1996 PEP Modular Computers GmbH | Page 5 - 33 | |
|
| ||
